OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0258

Lost Communication With Radio Transceiver

Despite its name this unit has nothing to do with the audio tuner: Ford's radio transceiver module (RTM) handles the wireless link to keys and remote accessories. On the 2021-2022 Bronco Sport, Ford traced No Key Detected messages to blocked key frequencies or a flat key battery and advised laying the key in the forward console tray, the backup position close to the RTM (SSM 50341); RTMs in recent F-150 and Super Duty trucks work on a changed frequency, so only one accessory keypad part fits (SSM 54546). No manufacturer documents U0258 itself publicly, nor a timeout. A receiver such as the body control module would set it when RTM messages stop on the bus. Keyless entry, key detection at start-up or remote functions may then fail; corrupt RTM data are U0559, a remote start module is U0254.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number2 / 58

Possible causes

  • Transceiver without power or ground, or loose connector high
  • Open or shorted data line between transceiver and its master module medium
  • Transceiver software or configuration not matching after replacement medium
  • Internal failure of the radio transceiver low

Symptoms

  • No Key Detected or key not recognized at start-up
  • Keyless entry, remote locking or keypad without function

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U0258

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication