OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0257

Lost Communication With Front Controls/Display Interface Module

Some vehicles combine keys and screen in a single front controls/display interface module. Ford calls such a unit FCDIM, for example with the small audio display on the Escape (2013-2016) and the 2016 Transit Connect, Transit and Focus (SSM 47234), while the 2011 Saab 9-5 reserves U0257 for a unit merging info display and faceplate. Audi documents the code itself for the 2026 Q3: the panoramic display (KX2) ignored touches on the central MMI screen, and U025700 was active in information electronics control unit 1 (address 005F). The display's own software was to blame; dealers replace the display, while improved software follows from model year 2027 (TSB 2082126/1). A silent unit leaves both its keys and its screen without function; separate units use U0255 and U0256.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number2 / 57

Possible causes

  • Software fault in the combined display unit (Audi panoramic display) high
  • Unit without power or ground, or connector not fully seated after dashboard work medium
  • Internal failure of the combined controls/display unit medium
  • Fault on the infotainment bus branch shared with other units low

Symptoms

  • Screen does not respond to touch or stays dark
  • Radio preset or menu keys without function or erratic

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U0257

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication