U0253
Lost Communication With Accessory Protocol Interface Module
The accessory protocol interface module is Ford's SYNC computer (APIM), which connects touchscreen, phone and voice functions with the vehicle network. Other modules log U0253 when its frames stop arriving, and Ford bulletins show several listeners: the headlamp module of the 2017 Lincoln MKZ after a remote start, cured by new HCM software (SSM 46508); the FCIM switch panel of 2015-2017 F-150 trucks, which froze under heavy CAN load (SSM 46902); and the ABS module of the 2021 F-150 with U0253:00, an informational entry without symptoms that new ABS software removed (SSM 50290, 51329). Mach-E owners (2021-2023) saw the drive mode reset to normal while driving because of APIM software, and the ABS sometimes held U0253 as well (TSB 24-2012). Settings sent from the screen may be lost.
Possible causes
- APIM or receiving-module software fault, fixed by reprogramming or over-the-air update high
- APIM without power or ground (fuse, connector behind the center display) medium
- Network overload or a module locking up after remote start or battery work medium
- Internal failure of the SYNC module low
Symptoms
- Center screen dark, frozen or rebooting
- Drive mode or settings fall back to default, message Drive Mode Not Available
- Code stored in ABS, headlamp or switch module without noticeable fault
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for U0253
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.