OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0250

Lost Communication With Impact Classification System Module

Within the airbag system, an impact classification module sorts a collision by type and force, so that airbags and belt pretensioners fire in the right combination and stage. U0250 is logged when its messages no longer reach the network, most plausibly by the restraint control module. No manufacturer publishes a description, timeout or fault type for this code. Patent US7832762 on crash sensing over a vehicle bus explains why such a link is monitored at all: sensors and the occupant protection controller exchange their data as messages, so a missing node removes input from the deployment decision. Expect the airbag warning lamp to light and the restraint system to run without that information until the fault is gone. Work on it belongs in a workshop. Restraint module loss is U0151; invalid data from this unit are U0551.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number2 / 50

Possible causes

  • Loose or corroded connector or damaged harness to the module, often after body repair high
  • Module without power or ground medium
  • Module damaged in a collision or not set up after replacement medium
  • Module internally faulty low

Symptoms

  • Airbag warning lamp on
  • Code also stored in the restraint control module

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U0250

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication