OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U024E

Lost Communication With Side Obstacle Detection Control Module C

Side obstacle detection modules are radar units that watch the blind spots and crossing traffic. Left and right units have their own codes, U0232 and U0233; letters C and D cover extra units. Ford names all four in SSM 51903 and its successors 53018 and 53569: SODL, SODR, SODCMC and SODCMD on 2021–2025 Ford and Lincoln models. After a module swap these units store U2100 when left unconfigured and U3002 when carrying another vehicle's VIN, and the VIN Write application in FDRS fixes it. U024E itself is in no public maker text; it is set by a module that consumes radar data, for example the cruise control or gateway module, when unit C stops sending. Bumper damage, a wet connector or a wrong replacement are likely triggers. Blind spot and cross-traffic alerts switch off with a message. D is U024F; invalid data from C are U054F.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number2 / 4E

Possible causes

  • Radar connector or harness in the bumper damaged, wet or corroded high
  • Replacement or used module not configured for the vehicle medium
  • Radar module without power or ground medium
  • Radar module internally faulty low

Symptoms

  • Blind spot system unavailable message
  • Blind spot and cross-traffic alerts missing

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U024E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication