OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U024B

Lost Communication With Seat Control Module G

Ford assigns seat control module G to the driver's multi-contour seat (SCMG), which runs massage and lumbar adjustment. Two Ford bulletins name U024B. TSB 19-2293, later 19-2390, covers multi-contour seats from the 2013 MKZ to 2019 F-150, Explorer, Expedition and Navigator: massage and lumbar respond only now and then from the switch or touchscreen, sometimes with B1471, U024B or U024C, because terminals fret in the SCMG and SCMH connectors; new pigtails and a rerouted harness fix it. SSM 53226 adds that on 2020–2021 F-Super Duty an SCMG software update by FDRS can misconfigure the module so the SYNC module (APIM) stores U024B; running the SCMG configuration app clears it. Expect driver massage and lumbar to drop out. The passenger unit H is U024C; invalid data from G are U054C.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number2 / 4B

Possible causes

  • Fretting corrosion in the SCMG connector terminals under the seat high
  • Module misconfigured after a software update (configuration app not run) medium
  • Seat harness strained by seat travel or poor routing medium
  • Multi-contour seat module internally faulty low

Symptoms

  • Driver seat massage and lumbar inoperative or intermittent
  • Seat settings on the SYNC screen without response
  • B1471 stored alongside

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U024B

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication