OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U024A

Lost Communication With Interior Lighting Control Module A

Interior lighting control module A switches and dims cabin lights such as dome, footwell and ambient strips. In newer cars these are often small LIN nodes under a master, usually the body controller. A Microchip demo board for LIN ambient light illustrates the traffic: the master sends colour and brightness per zone and polls a status frame back. GM's Saab 9-5 documentation states that on a LIN subsystem the primary module records a lost-contact code for any node that stops answering, and that is the route by which U024A is normally stored. No manufacturer documents U024A publicly, so timeouts are unknown. Typical findings are a loose plug at a roof or door light unit or a LIN line chafed in the headliner. Cabin lights stay dark or on, and ambient colours freeze. Module B is U02BF; corrupt data from A give U054B.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number2 / 4A

Possible causes

  • Loose or corroded plug at a roof, door or footwell light unit high
  • LIN line chafed or pinched in headliner, door or trim medium
  • Lighting module without power or ground medium
  • Lighting module internally faulty low

Symptoms

  • Interior lights do not come on or stay on
  • Ambient lighting colour or brightness cannot be changed

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for U024A

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication