U0248
Lost Communication With Remote Accessory Module
No manufacturer explains publicly what the remote accessory module does or when U0248 is set. The name suggests a body-side unit that switches accessories outside the main controllers. Separate codes exist for Ford's SYNC interface unit (APIM, U0253) and for a remote start module (U0254). For the 2011 Saab 9-5, GM explains how lost-communication codes arise in general: receivers check for expected signals, some serving as a sender's heartbeat; when one stops, they fall back to default values and record a lost-contact code for that sender. The same GM code list has no entry for U0248. Any listener would follow that scheme once this module falls silent. What the driver notices depends entirely on the accessory involved; driving is unaffected. Invalid data from it are U0549.
Possible causes
- Module without power or ground (fuse, connector) high
- Retrofitted or removed accessory, module configured but not present medium
- Bus wiring or connector to the module damaged medium
- Module internally faulty low
Symptoms
- Accessory function controlled by the module inoperative
- Code stored in other modules without noticeable fault
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for U0248
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- saabwisonline.com/9-5-9650/2011/3-electrical-system/bus-and-diagnostics-communication/technical-description/data-link-communications-description-and-operation
- saabwisonline.com/9-5-9650/2011/3-electrical-system/bus-and-diagnostics-communication/fault-diagnosis-diagnostic-trouble-codes/control-module-u-code-list