OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0247

Lost Communication With Seat Control Module F

In Ford's module naming, letter F stands for the rear seat climate control module (SCMF), the unit that heats and, where fitted, ventilates the second-row outboard seats; a 2024 scan-tool release lists it next to SCME for the front seats and SCMG/SCMH for the multi-contour seats. Ford's climate seat bulletins show how such a unit is serviced: stored codes are read in the module first, then blower or configuration are addressed (TSB 16-0080 for the front SCME). No public maker text uses U0247. It would be stored by the module passing rear seat requests, typically the body controller or rear climate panel, when SCMF frames are missing. Because the rear unit often sits under the second-row cushion, folding seats can strain its harness. Rear seat heating or cooling then stops. Front climate seats are U0246; implausible data from F are U0548.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number2 / 47

Possible causes

  • Harness or connector strained by folding or sliding the second-row seat high
  • Rear climate seat module without power or ground medium
  • Module replaced without configuration low
  • Module internally faulty, for example after liquid spilled on the seat low

Symptoms

  • Rear seat heating or ventilation inoperative
  • Rear seat climate buttons without response

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U0247

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication