OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0246

Lost Communication With Seat Control Module E

Seat control module E belongs to the letters beyond driver and passenger units. Ford fills it with the front seat climate control module (SCME), which runs heating and the backrest and cushion fans of the front seats; its 2024 module list in a scan-tool release names SCME that way. On 2015–2016 Edge and 2016 Explorer weak backrest cooling was fixed by a new blower and, on Explorer, an as-built update of the SCME, after first checking the SCME for stored codes (TSB 16-0080). No maker document cites U0246 itself. A module that commands the seats, such as the body controller, the climate unit or the touchscreen module, would log it when SCME frames vanish. Heated or ventilated front seats then stop and their buttons do nothing. F is the rear climate unit (U0247); bad data from E are U0547.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number2 / 46

Possible causes

  • Loose, pinched or corroded connector under the front seat high
  • Climate seat module without power or ground (fuse) medium
  • Module replaced or updated without correct configuration medium
  • Climate seat module internally faulty low

Symptoms

  • Front seat heating and ventilation inoperative
  • Seat climate buttons or touchscreen entries without response

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U0246

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication