U0240
Lost Communication With Entrapment Control Module B
U0240 flags the second anti-trap unit, entrapment control module B, as missing on the network. Where a vehicle has more than one automatically closing panel, for example a sunroof plus a power sliding door, each may carry its own reversal electronics, and B denotes one of them as assigned by the maker; no manufacturer documents U0240 publicly. The protection itself is defined by FMVSS 118, which limits the squeezing force and requires reversal before a test rod is trapped, and by the reversal logic in anti-pinch modules that compare motor current with a learned profile. GM's lost communication logic still applies: a periodic status message stays away with supply at 9-16 V. Pair with U0239 for module A. Automatic closing may be disabled; no MIL.
Possible causes
- Module B without power or ground high
- Wiring broken in a moving harness (sliding door, roof frame) medium
- Entrapment control module B faulty low
Symptoms
- Automatic close function of a panel disabled
- Panel only moves while the switch is held
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for U0240
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.