OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U023A

Lost Communication With Image Processing Module A

U023A reports loss of image processing module A, usually the windscreen camera feeding lane keeping, auto high beam and collision warning. Ford calls it IPMA: Mustang 2024 (SSM 52077) logs U023A in the SCCM after a remote start with Pre-Collision Assist unavailable, and F-150 2021-2023 (TSB 24-2267) shows U023A:08 after SCCM programming, fixed by IPMA software. GM PIT5482 (2016 Tahoe, Escalade, Silverado and others) forbids replacing the front camera for a history U023A with Service Front Camera; PIC5814 (2013 ATS, XTS, SRX) says the short range radars log it at every shutdown, no repair needed. Toyota T-TT-0352-15: Highlander meters swapped from cars without LDA keep it for good. Ford's 2014 list: no MIL.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number2 / 3A

Possible causes

  • Camera module software or low power mode handling (Ford IPMA) high
  • History code logged at power down without real fault (GM PIC5814) medium
  • Instrument cluster swapped from a car without lane departure alert (Toyota) low
  • Camera plug or wiring at the windscreen damaged low

Symptoms

  • Service front camera or pre-collision assist unavailable message
  • Lane keeping and auto high beam off
  • Code only stored as history

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for U023A

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication