OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0230

Lost Communication With Rear Gate Module

U0230 means the rear gate module, which runs a powered liftgate or tailgate with its drive, latch, cinch motor and pinch detection, has dropped off the bus. Toyota bulletin T-SB-0038-15 (Highlander and Highlander HV 2008-2013) names U0230 together with B2222 when the power back door reverses at the end of its travel or clunks at the striker, and gives a hinge and hatch inspection and repair. GM PI PIT5422 (Equinox, Terrain 2010-2015) blames moisture and corroded terminals in connector X901, high on the liftgate, for U0230 and other low speed LAN codes. A Chrysler STAR case (S1908000143) found it as Power Liftgate Module code beside chafed wiring at the right B-pillar. Saab lists the slot as Liftgate Control Module. Power operation of the gate fails; no MIL.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number2 / 30

Possible causes

  • Water or corrosion in the harness connector at the liftgate high
  • Wires broken in the flexing harness between body and gate medium
  • Bus wiring chafed along the body (seat or pillar area) medium
  • Rear gate module faulty low

Symptoms

  • Power liftgate does not open or close electrically
  • Gate reverses or stops during power closing
  • Several lost communication codes stored at once

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for U0230

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication