OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U022E

Lost Communication With Object Detection Maintenance Control Module A

U022E reports that object detection maintenance control module A has stopped talking on the vehicle network. The J2012 name points to a unit that keeps the detection sensors of the driver assistance system usable, for example by washing or heating camera, radar or lidar covers; patent US11077472B2 describes such a cleaning device for an object detection sensor. No manufacturer documents U022E publicly, so the real job of module A, its bus and its mounting place come from the maker's wiring data. GM's general logic for the U0100-U02FF range applies: a receiving unit misses the periodic status message at 9-16 V and stores the code. U022F is module B, U052F flags implausible data from A. Expect sensor cleaning or assistance warnings; no MIL is known.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number2 / 2E

Possible causes

  • Module A without power or ground (fuse, connector) high
  • Damaged or corroded bus wiring to module A medium
  • Washer fluid or water ingress at the module or its plug medium
  • Module A faulty or not programmed low

Symptoms

  • Sensor cleaning or sensor blocked warning
  • Driver assistance features unavailable

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for U022E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication