U0228
Lost Communication With Door Window Motor G
U0228 concerns door window motor G, the last letter of this group. No manufacturer documents U0228 publicly. GM shows that a networked window motor does not automatically mean these generic codes: in the 2011 Saab 9-5 the body control module runs the front passenger and driver motors as devices 0 and 4 on LIN bus 3 and the two rear motors on LIN bus 4, and flags a lost motor with GM's own U1530, U1534, U1540 or U1544. Some motors do without Hall sensors; a Gentherm patent derives speed and pinch events from the current ripple, which still calls for electronics at the motor and thus a bus node. Which door carries G is up to the maker. No MIL.
Possible causes
- Broken bus or supply wire in the door harness high
- Corroded or loose motor connector medium
- Electronics of window motor G failed medium
Symptoms
- Window in the affected door does not move
- Pinch protection and one-touch operation unavailable
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for U0228
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.