U0227
Lost Communication With Door Window Motor F
U0227 reports that door window motor F cannot be reached. Besides wiring faults, the LIN sleep and wake cycle is worth understanding here. In NXP's AN2960 window-lift example the motor node drops into low-power mode on a go-to-sleep request, or after four seconds without bus traffic, behaviour that LIN 2.0 makes mandatory for slaves, and it becomes active again on bus activity or through a wake pin. A node that fails to wake, for instance because of an unstable supply or a damaged transceiver, looks to the master like a lost node. No manufacturer documents U0227 publicly, and letter F is assigned by the maker. U0528 is the matching invalid-data code. No MIL.
Possible causes
- Weak or interrupted supply or ground at the motor high
- LIN transceiver in the motor electronics damaged medium
- Broken wire in the door harness medium
- Software fault in the LIN master (door or body module) low
Symptoms
- Window fails intermittently
- Window and its one-touch function inoperative
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for U0227
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.