U0221
Lost Communication With Door Switch G
U0221 is stored when door switch unit G no longer replies. The weak spot is often the passage between door and body, where the harness bends at every opening. FCA STAR cases S1808000031 and S2108000106 (Jeep Compass 2018–2021) describe it: corrosion at the driver door-to-body connector and a badly seated rubber grommet led to intermittent windows, locks and mirrors, rear windows lowering on their own, door-ajar warnings, start/stop dropouts and LIN complaints; the fix was cleaning the connector, seating it fully and aligning the grommet. Those cases list B-codes, not U0221. No manufacturer documents U0221 publicly; which door carries G depends on the maker. No MIL.
Possible causes
- Corroded door-to-body connector behind a poorly sealing grommet high
- Door connector not fully engaged medium
- Wire chafed or broken inside the grommet medium
- Switch unit G failed low
Symptoms
- Windows, locks and mirrors fail intermittently
- Door-ajar warning while driving
- Start/stop function stops working at times
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for U0221
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.