U0217
Lost Communication With Door Switch C
U0217 is set when door switch unit C no longer answers its master. How much breaks then depends on the door architecture. In NXP's LIN door reference SG2034 the driver's control switch panel is itself the LIN master and commands the front and rear window lifters, door locks and mirror as slaves; in the AN2205 layout the keypad is only a slave whose key states are read by the body controller, or alternatively by the window nodes. If the lost unit is the driver's panel, the remote buttons for the other windows can go dead together with its own keys, while a passenger panel usually affects one window. No manufacturer documents U0217 publicly, and the letter-to-door mapping is set by the maker. No MIL.
Possible causes
- Broken wire in the flexing harness between door and body high
- Corroded or loose connector at the switch panel medium
- Switch panel electronics failed medium
- Fault in the door or body module that polls the panel low
Symptoms
- Other windows can no longer be operated from the driver's panel
- Keys on the affected panel inoperative
- Mirror adjustment from the panel unavailable
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for U0217
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.