OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0203

Lost Communication With Door Control Module E

U0203 reports a missing door control module E. For the 2011 Saab 9-5, GM fills this slot with the left rear door switch panel, so on these GM platforms E is the electronics behind the rear left window and lock switches rather than a fifth door. GM preliminary information PIT5606J (GMC Acadia and Cadillac XT5, 2017–2021) lists U0203 among a crowd of U-codes that show up together when the instrument panel harness rubs through at the steering column next to the intermediate shaft, or when water reaches the body control module through a blocked HVAC drain or enters connectors such as X200, X201 and X500. Door locks cycling while driving or seats moving by themselves belong to that picture. The code alone sets no MIL.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number2 / 03

Possible causes

  • Instrument panel harness chafed at the steering column (GM Acadia/XT5) high
  • Water at the body control module or in body connectors high
  • Broken wires between rear door and body medium
  • Rear door switch panel module faulty low

Symptoms

  • Left rear window or lock switches without function
  • Door locks cycle on their own while driving
  • Many other lost-communication codes stored at once

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U0203

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication