OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0200

Lost Communication With Door Control Module B

U0200 means door control module B has dropped off the bus; most makers use B for the front passenger door. For the 2005–2010 Chrysler 300 and Charger, bulletin 08-061-12 names it the passenger door module and replaces it when locks and windows stay dead. Audi bulletin 2051276 (Q5 2018) finds U020000 in gateway J533 with a dead passenger window or lock switch, sometimes U10BA00 or U111100 in the driver door, and cures it with a one-minute fuse reset and new software for J387. Stellantis case S2423000040 (Durango 2023) sees U0200-00 with an intermittent passenger lock and checks pins, the lock rod and finally the latch. VW tech tip 97-21-02 pairs U019900 or U020000 with loose pins at the A-pillar. Usually no MIL; U0501 is invalid data.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number2 / 00

Possible causes

  • Passenger door module software (Audi Q5 J387 update) high
  • Loose, bent or corroded pins in the door or A-pillar connector high
  • Broken wires in the door hinge harness medium
  • Passenger door module faulty (Chrysler 300/Charger) low

Symptoms

  • Passenger window or lock switch inoperative
  • Door does not lock or unlock centrally, sometimes intermittent
  • Child lock or door warning message in the cluster

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for U0200

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication