U01BF
Lost Communication With Battery Management Control Module
A battery management control module watches cell voltages, temperatures and current and decides how much power a pack may deliver or accept. The J2012 name does not tie it to the high-voltage battery. GM's 2024 and 2025 tables (24OBDG07, 25OBDG03B) assign U01BF00 to the central gateway module, which sets it when supervised messages from a unit GM calls LIBI are missing for 2.5 times their nominal period, with supply above 7 V and an active power mode; the fault matures after 6.5 s and is Type B, two trips. No other manufacturer documents the code publicly. Depending on what the module guards, expect battery or electrical warnings and limited charging or power. U04C0 is the invalid-data partner, U0111 the battery energy control module A, U01B0 the 12 V battery sensor.
Possible causes
- Bus wiring or connector between gateway and battery module damaged high
- Module supply interrupted or 12 V voltage too low medium
- Battery management control module faulty low
Symptoms
- Battery or electrical system warning
- Charging or drive power limited
- MIL on (GM Type B)
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for U01BF
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.