OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U01BC

Lost Communication With Charge Air Cooler Coolant Pump B

Engines with a water-cooled charge air cooler run a separate low-temperature coolant loop with an electric pump, usually a LIN slave of the engine controller. Rheinmetall's pumps of this kind are driven via PWM or LIN, and Bosch's PCE pump has a built-in diagnostic function reported to a higher-level unit. U01BC applies where a second pump, B, serves this loop. No manufacturer documents the code publicly. For pump A, GM's 2025 tables (25OBDG04B) declare lost LIN contact after 2.5 s without a pump response while the pump is enabled, Type A, one trip, a sign of how strictly such losses are treated. CARB 1968.2 requires charge air undercooling to be detected, which a silent pump would hide. Expect a MIL and reduced boost or power when hot; U02A9 is pump A.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number1 / BC

Possible causes

  • Water or corrosion in the pump connector at the front of the engine bay high
  • Pump supply fuse or relay open medium
  • Electric coolant pump B electronics or motor faulty medium

Symptoms

  • MIL on
  • Reduced power or boost, especially in hot weather

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U01BC

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication