U01B4
Lost Communication With Brake System Control Module B
Brake system control module B is the second brake controller in a two-unit layout, often the electric brake booster beside the stability control unit. GM's 2018 table for the CT6 plug-in hybrid (18OBDG01) has the engine controller flag U01B4 when frame $4FB from BSC2 has been missing for 10 s on the high-speed bus, Type B, two trips. Porsche technical information 105/25 (Taycan from 2020, Cayenne and Panamera from 2024) shows U01B400 in the PSM unit as lost contact with the brake booster, paired with C114113 when the booster's roughly one-minute run-on after switch-off was cut short; the MIL lights, yet no part needs replacing, erasing the memory with a charger connected suffices. U0129 is module A, U04B5 invalid data from B.
Possible causes
- Booster run-on interrupted at switch-off (Porsche, no part fault) high
- Damaged CAN wiring or connector at the brake module medium
- Low 12 V supply during start or shutdown medium
- Brake system control module B faulty low
Symptoms
- MIL on, sometimes with brake or stability warnings
- Driver assistance functions unavailable
- Changed brake pedal feel if the booster is affected
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for U01B4
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.