U01AC
Lost Communication With Hybrid/EV Battery Interface Control Module M
U01AC belongs to battery interface control module M and is the last one GM mentions: its 2018 hybrid table ends the fault bundle BICM Loss of Comm at U01AC, i.e. thirteen boards, whereas GM's model-specific tables from 2016 to 2019 only monitor A to H. For diagnosis the order of events matters more than the letter. GM first sets the summary code U179C for one or more silent boards and only afterwards names the first board it cannot reach, so a workshop should record all stored module codes, U179C and the invalid-data and software codes of the same letter (U04AD, U0346) before clearing, then compare the count with the boards actually fitted. No manufacturer publishes a threshold or MIL type for M.
Possible causes
- Chain connection between module L and module M interrupted high
- Battery interface control module M defective medium
- Controller calibration expects more boards than the pack contains low
Symptoms
- Summary code for missing boards stored together with U01AC
- Battery warning and reduced output
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for U01AC
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.