U01AB
Lost Communication With Hybrid/EV Battery Interface Control Module L
U01AB points at battery interface control module L, the twelfth position. The link to such a board has to bridge a large voltage offset, because the lowest and highest boards of a stack sit hundreds of volts apart. NXP's MC33771C, as one example, talks over a two-wire twisted pair coupled through transformers or capacitors at up to 2 Mbit/s, and Wikipedia's battery management article mentions optical isolation and radio as the alternatives. A broken coupling element or a damaged twisted pair at L can therefore cut the board off while it still measures correctly. No vehicle maker documents U01AB with a threshold of its own; GM lists it only in the 2018 fault bundle BICM Loss of Comm, so how the MIL behaves depends on the individual system.
Possible causes
- Isolating transformer or capacitor on the link to L failed medium
- Twisted-pair chain line to module L chafed, pinched or unplugged high
- Battery interface control module L defective low
Symptoms
- Battery or hybrid warning
- Power limited, charging may be blocked
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for U01AB
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.