U01A8
Lost Communication With Hybrid/EV Battery Interface Control Module I
U01A8 is the code for battery interface control module I and is only needed on packs with more than eight monitoring boards. GM's 2018 hybrid table contains it solely inside the fault bundle BICM Loss of Comm (U01A0-U01AC), adding that GM shares software across programs and only codes valid for the vehicle at hand apply; there is no monitor entry of its own, so neither threshold nor MIL type is published for I. Packs of that size exist: according to Wikipedia, the Ultium battery of the Hummer EV holds 24 modules, but which systems really use U01A8 remains undocumented. When it appears, the battery controller has lost the ninth board of its chain while the eight before it still answer. CARB requires separate codes per replaceable unit.
Possible causes
- Chain connection between module H and module I interrupted high
- Battery interface control module I defective medium
- Battery controller configured for more boards than fitted low
Symptoms
- Battery or hybrid warning, power limited
- Charging blocked
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for U01A8
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.