U01A6
Lost Communication With Hybrid/EV Battery Interface Control Module G
U01A6 means battery interface control module G no longer reports to the battery controller. Because these boards sit inside the high-voltage pack, the chain runs between modules whose ground levels differ by hundreds of volts, so the link has to be galvanically isolated; Wikipedia's battery management article names optical couplers and radio as the hardware routes. Diagnosis therefore starts on a de-energised pack: note which neighbouring letters still report, then look at G's plugs for corrosion, coolant or moisture and carry out an insulation test before swapping parts. GM's 2016-2019 plug-in tables classify G as Type A, lighting the MIL in the first failing trip, and Audi's bulletins for the 2016 A3 e-tron and the Q5 e list U01A600 together with the other seven letters.
Possible causes
- Moisture or coolant at the chain connectors of module G medium
- Chain link between module F and module G interrupted high
- Isolating coupler (transformer, optocoupler) on the link to G failed medium
- Battery interface control module G defective low
Symptoms
- MIL and battery warning lamp
- Insulation fault code stored alongside if moisture has entered
- Reduced power or no ready mode
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for U01A6
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.