OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U01A5

Lost Communication With Hybrid/EV Battery Interface Control Module F

U01A5 says the battery controller no longer receives data from interface module F. Once such a board drops out, the cells it covers are unsupervised: no voltage readings, no temperatures and no balancing for that section. GM therefore puts all of these codes into a fault bundle called BICM Loss of Comm in its 2018 hybrid table, which blocks battery diagnostics that would otherwise misfire on missing values. On the road the controller shields the pack, so reduced power, refused charging or opened contactors are to be expected. Audi bulletin 2078135 for the 2016 A3 Sportback e-tron describes a drive system that cannot be activated and a red warning lamp, with U01A500 among the A-H codes plus P0AA500 and P0A7D00. GM monitors F as Type A from 2016 to 2019.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number1 / A5

Possible causes

  • Chain connection between module E and module F interrupted high
  • Battery interface control module F defective medium
  • Board F loses supply because its cell group or sense tap is open low

Symptoms

  • Drive system cannot be activated, red warning lamp
  • Charging refused or stopped early
  • Other battery diagnostics suspended while the code is active

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U01A5

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication