OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U01A4

Lost Communication With Hybrid/EV Battery Interface Control Module E

U01A4 concerns battery interface control module E. Whether such a code points to one board or to a whole broken chain depends on the wiring scheme. In a plain daisy chain a break silences all boards behind it, and GM's logic names only the first. Some monitoring chips allow a closed ring instead: TI's BQ79616 offers an isolated differential daisy chain with an optional ring, and a CATL patent (US11031789) describes a controller that, after the loop breaks, drives the two remaining halves through its two serial ports. In such designs a lone E code is much more telling, since boards beyond the gap are still heard from the far end. GM's eight-board plug-in tables of 2016-2019 rate the loss of E as Type A.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number1 / A4

Possible causes

  • Chain link between module D and module E interrupted (open chain) high
  • Module E itself defective (likely in ring designs when neighbours still report) medium
  • Return path of a ring layout damaged in addition to the main path low

Symptoms

  • Battery warning and reduced output
  • Only module E reported missing although later boards are silent too (open chain)
  • MIL on the first trip (GM Type A)

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U01A4

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication