OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U01A3

Lost Communication With Hybrid/EV Battery Interface Control Module D

U01A3 marks a lost link to battery interface control module D. Before this generic block existed, GM used proprietary numbers for the same fault: the GM U-code list published for the 2011 Saab 9-4X names U2603 to U2606 as the battery energy control module losing hybrid battery interface modules 1 to 4. GM's 2018 hybrid table still groups these older numbers together with U01A0-U01AC and U179C in one fault bundle, so scan reports from different model years may show either form for the same board. In GM's 2016-2019 plug-in tables D is the fourth of eight boards and is rated Type A. One oddity to keep in mind: invalid data from module D is reported as U02A0, outside the U04A row used by its siblings.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number1 / A3

Possible causes

  • Chain connection from module C to module D interrupted high
  • Battery interface control module D defective medium
  • Scan tool or software generation reports the board under the older GM number low

Symptoms

  • MIL and hybrid/EV warning (GM Type A)
  • Limited power, electric range shortened
  • Cell voltages of one pack section shown as unavailable

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U01A3

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication