OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U01A1

Lost Communication With Hybrid/EV Battery Interface Control Module B

U01A1 refers to battery interface control module B. In GM's eAssist mild hybrids it is the second and final board: bulletin PIT5513D lists two high-voltage battery interface control modules, K112A and K112B, for Silverado and Sierra trucks of 2016 to 2018 and the 2018 LaCrosse, and the GM tables 16OBDG07B and 19OBDG03B accordingly contain only U01A0 and U01A1. Their rating is milder than in the plug-in hybrids: Type B, so the MIL waits for a second failing trip; the 2016 table asks for more than 9.1 V and 4.5 s. If B is logged alone, the fault lies at B or at the link from A to B; both letters together point rather to a shared feed or the master side. GM placed these powerpacks and both boards under parts restriction via its technical assistance center.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number1 / A1

Possible causes

  • Chain connection between module A and module B interrupted or corroded high
  • Battery interface control module B (GM K112B) defective medium
  • Common low-voltage feed of the powerpack interrupted (then usually A as well) low

Symptoms

  • MIL only after two consecutive failing trips (GM Type B)
  • Start-stop and electric assist unavailable
  • Hybrid system warning message

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U01A1

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication