OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U019F

Lost Communication With Engine Coolant Pump Control Module

U019F means the electric engine coolant pump, which carries its own control electronics, has stopped answering. Mercedes documents it on two engines: on the M256 six-cylinder the engine controller stores U019F00 or U019F87 with a red coolant warning; LI20.10-P-075374 checks the 12 V and 48 V plugs of pump M75/11, its ground and fuse F153/2 and, if the pump touches the heat shield, insulates it or replaces the controller. On C350e and GLC350e hybrids the check engine lamp lights as well; MED40 software or a new pump fixes it. Ford SSM 46857 and 47790 (C-MAX, Fusion, MKZ hybrids) report it with an MIL from water in connectors such as C1651. Mazda warns that swapped pumps on the CX-90/CX-70 PHEV set it. U04A0 is invalid data.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number1 / 9F

Possible causes

  • Pump supply plug, 48 V connector or ground loose or dirty (Mercedes) high
  • Water or corrosion in front-end connectors (Ford hybrids) medium
  • Similar-looking pumps swapped or wrong part ordered (Mazda PHEV) medium
  • Engine controller software outdated (Mercedes MED40) low
  • Electric coolant pump electronics faulty low

Symptoms

  • Red coolant temperature warning
  • MIL or check engine lamp on
  • Engine power reduced to protect against overheating

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U019F

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication