OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U019D

Lost Communication With Direct Ozone Reduction Catalyst Temperature Sensor

U019D concerns a temperature sensor at a direct ozone reduction (DOR) catalyst that reports over the network rather than a plain wire; the wired versions have P2567-P2571. A DOR catalyst is a coating on the radiator or A/C condenser that turns ozone in the passing air into oxygen, such as Engelhard's PremAir, first fitted by Volvo on the S80 and by Nissan on the Sentra CA. CARB grants an NMOG credit for it only with an OBD monitor, and 13 CCR 1968.2 (e)(14) sets the malfunction criteria; under LEV III the credit reaches 5 mg/mi. No manufacturer documents U019D publicly. Without sensor data the DOR monitor cannot run, so the credit is unsupported and a MIL is to be expected. Driving is unaffected. U049E is invalid data.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number1 / 9D

Possible causes

  • Sensor connector at the radiator corroded or damaged by road debris high
  • Sensor left unplugged or radiator replaced after front-end repair medium
  • Bus or supply line to the sensor broken medium
  • DOR temperature sensor faulty low

Symptoms

  • MIL on without noticeable driving fault
  • DOR monitor shown as not complete

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U019D

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication