OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U019C

Lost Communication With Glow Plug Control Module 2

U019C points to a second glow plug control module, needed where a diesel has more preheating channels than one unit drives, for example one module per cylinder bank. No manufacturer documents U019C publicly; it is absent from GM's diesel tables and from the NHTSA bulletin index. The partner code U0106 for module 1 shows the logic: GM's 2015 engine diagnostics table fails it when no GPCM frame has arrived for more than 0.25 s during a 10 s test and rates it Type B. CARB requires glow plugs to be checked for correct current and response to commands, which presumes a live link to the module. The plugs on the affected side may stay cold, giving hard cold starts, rough running and white smoke while warming up; an MIL is to be expected. U049D is invalid data.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number1 / 9C

Possible causes

  • Glow plug module 2 without supply, ground or ignition feed high
  • Water or corrosion in the module connector near the engine medium
  • Bus line to module 2 chafed or connector loose medium
  • Glow plug control module 2 faulty low

Symptoms

  • Hard starting when cold
  • White smoke and rough idle until warm
  • Preheat lamp behaves oddly, MIL on

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U019C

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication