U019A
Lost Communication With Tachograph Module
U019A is stored when the tachograph stops sending on the vehicle bus. Tachographs log speed, distance and driving time in trucks and buses; in the EU every newly registered vehicle of that class has needed a digital unit since May 2006. Many engine and body controllers take road speed from the tachograph frame, so the fault reaches beyond the logbook. Deutz lists U019A-00 as a communication fault with the tachograph in the fault table of its EMR L1 main engine controller and pairs it with SPN 1620 and FMI 2. No passenger-car maker documents the code publicly. Possible effects are a missing speed reading, inactive cruise control or speed limiter and a tachograph warning; whether a MIL lights is up to the engine maker. U049B is the invalid-data counterpart.
Possible causes
- Tachograph without power, ground or ignition signal high
- CAN wiring or connector behind the tachograph damaged medium
- Tachograph replaced or recalibrated without matching the bus configuration medium
- Tachograph unit faulty low
Symptoms
- Tachograph warning or speed display missing
- Cruise control or road speed limiter unavailable
- Code stored in the engine controller
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for U019A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.