OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U018A

Lost Communication With Headlamp Leveling Control Module B

U018A covers headlamp leveling control module B. Cars with separate levelling electronics in each headlamp, or with a central controller plus lamp-side units, need a second address; U0181 is the first module. The electronics set the beam angle from ride-height sensor data so that load or pitch does not dazzle oncoming traffic, which LED and xenon lamps usually require. No manufacturer documents U018A publicly, and it appears neither in GM's U-code list nor in the NHTSA bulletin index. The trigger is the same as for other lost-communication codes in GM's description: a periodic message missing at 9-16 V supply. Beam height on one side may freeze or drop to a low default, a lighting warning is possible, the MIL stays off. U048B is invalid data from B.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number1 / 8A

Possible causes

  • Levelling module B without power or ground high
  • Corroded connector at the headlamp from moisture medium
  • Bus line to the headlamp damaged after a front-end repair medium
  • Headlamp levelling module B faulty or not coded low

Symptoms

  • One headlamp no longer adjusts its beam height
  • Headlamp or lighting warning in the cluster
  • Uneven or very low beam pattern

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U018A

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication