OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0183

Lost Communication With Lighting Control Module - Rear A

U0183 refers to rear lighting control module A, the unit that drives tail, brake, turn and in some designs reversing lamps at the back of the vehicle. A second rear unit, B, has U0252, the front module U0182. Such modules are found where LED rear lamps are switched and checked electronically, for example in a tailgate. No manufacturer documents U0183 publicly; neither GM's U-code list nor the NHTSA bulletin index carries it. GM's generic description for codes U0100-U02FF gives the trigger: an expected periodic message from the module goes missing while the system voltage is 9-16 V. Rear lamps may fail, fall back to a default pattern or raise a bulb warning. That matters for being seen, although no MIL is involved.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number1 / 83

Possible causes

  • Rear lighting module without power or ground high
  • Wiring broken in the tailgate or boot lid hinge loom medium
  • Corroded connector at the rear lamp or module medium
  • Rear lighting control module A faulty low

Symptoms

  • Tail, brake or turn lamps at the rear not working
  • Bulb or lighting warning in the cluster
  • Rear lamps in a fixed default mode

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U0183

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication