U017D
Lost Communication With Restraints System Sensor N
U017D concerns restraint sensor N, the last of the fourteen sensor letters A to N; the two codes that follow belong to seat belt pretensioner modules. No manufacturer documents U017D publicly, and the Chrysler Jeep tables in NHTSA file PE11-019 never go past G. Bosch scales its premium airbag units to as many as 18 sensor inputs, so a fourteenth satellite is possible but rare. Most such sensors talk PSI5, an open interface developed from Autoliv, Bosch and Continental designs that sends Manchester-coded current pulses at 125 kbit/s over a twisted pair. That pair carries supply and data together, so a wiring repair must keep the twist and use approved crimp connectors. U047E is the invalid-data counterpart. Airbag lamp on, no MIL.
Possible causes
- Connector at sensor N loose or corroded high
- Earlier wiring repair untwisted or with unsuitable connectors medium
- Crash sensor N failed medium
- Airbag unit expects a sensor N that is not installed low
Symptoms
- Airbag warning lamp on
- Scan tool reports no response from sensor N
- Restraint deployment relying on sensor N may be disabled
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for U017D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.