U017B
Lost Communication With Restraints System Sensor L
U017B means sensor L of the restraint system, the twelfth remote crash sensor in J2012 order, no longer answers. No manufacturer documents U017B publicly, so which component sits behind the letter depends on the car. One example of how sensor counts grow: airbag control units can also run pedestrian protection, fed by acceleration sensors or by a pressure tube in the front bumper. In the Bosch pressure tube system, an air-filled silicone tube in the bumper has a pressure sensor at each end, and the unit can raise an active bonnet or fire a windscreen airbag 10 to 15 ms after striking a pedestrian. Bumper replacement or a parking knock are then typical reasons for a lost sensor. The airbag or pedestrian protection warning lights; no MIL.
Possible causes
- Sensor or its connector not refitted after bumper replacement high
- Sensor or wiring damaged by a minor front or side knock medium
- Corroded connector in an exposed mounting position medium
- Sensor L internally failed low
Symptoms
- Airbag or pedestrian protection warning on
- Protective function assigned to sensor L disabled
- Fault appears after body or bumper work
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for U017B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.