U017A
Lost Communication With Restraints System Sensor K
U017A is logged when restraint sensor K, the eleventh remote crash sensor, has stopped sending data to the restraints module. No manufacturer documents U017A publicly; the Chrysler Jeep lists in NHTSA file PE11-019 end at the sixth satellite. Why J2012 reserves so many slots becomes clear from supplier data: a current Bosch airbag control unit serves 12 PSI5 sensor interfaces, a premium version up to 18. Higher letters therefore belong to well-equipped vehicles, for example with rear-impact sensors, which Bosch also lists as a mounting option. After rear-end repairs or work in the boot floor, check first whether such a sensor was reconnected. Deployment that depends on sensor K may be switched off; the airbag lamp lights, the MIL stays off.
Possible causes
- Sensor K not reconnected after rear-end or boot floor repairs high
- Sensor line damaged along the rear body medium
- Crash sensor K failed medium
- Airbag unit configuration does not match the fitted sensors low
Symptoms
- Airbag warning lamp on
- Restraint functions depending on sensor K may be disabled
- Scan tool shows sensor K as absent
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for U017A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.