U0176
Lost Communication With Restraints System Sensor G
U0176 points to restraint sensor G. In Chrysler's usage, as recorded in the NHTSA investigation PE11-019, it is the second right side satellite acceleration sensor. Of those Jeeps, only MK (Compass/Patriot), KK (Liberty), WK and XK (Grand Cherokee, Commander) carry it, together with its left twin U0173; the Wrangler JK lists no second side sensor at all, so U0176 on a Wrangler of those years hints at wrong configuration rather than a broken part. Internal faults of this sensor appear as B1B76. A second sensor per side usually sits further back, for example near the C-pillar, which Bosch names as a mounting point, and helps cover rear-seat occupants and long curtain airbags. Airbag lamp on, no MIL.
Possible causes
- Connector behind the rear side or pillar trim loose or damaged high
- Line to the rear right sensor pinched or chafed medium
- Airbag unit configured for a second side sensor the vehicle does not have medium
- Second right side sensor failed low
Symptoms
- Airbag warning lamp on
- Side impact detection for the rear right area reduced
- Code stays active until sensor link or configuration is corrected
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for U0176
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.