OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0172

Lost Communication With Restraints System Sensor C

U0172 marks a lost link to restraint sensor C. Chrysler uses it for the first left side satellite acceleration sensor in the Jeep tables of NHTSA file PE11-019. The Wrangler JK has just this one sensor on each side, whereas Compass/Patriot, Liberty, Grand Cherokee and Commander add a second left unit reported as U0173. Bosch fits side sensors of this type to load-bearing parts such as sills, seat cross members and the B- or C-pillar, because a side impact leaves almost no crush space and the airbag unit must decide within a few milliseconds. With sensor C missing, left side and curtain airbag deployment may be degraded. An internal fault of the sensor appears as B1B72 instead. Water in the footwell or seat removal are typical triggers. No MIL.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number1 / 72

Possible causes

  • Water in the left footwell or sill area reaching the sensor connector high
  • Connector disturbed during seat, carpet or trim removal medium
  • Left side satellite sensor failed after a side knock medium
  • Airbag control unit input or configuration faulty low

Symptoms

  • Airbag warning lamp on
  • Left side and curtain airbag deployment may be impaired
  • Fault can be intermittent with wet carpets or after rain

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U0172

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication