U016D
Lost Communication With Exhaust Gas Sensor Module B
U016D refers to exhaust gas sensor module B, a second smart sensor unit in the exhaust that heats a probe, evaluates it and reports oxygen or NOx readings as bus data instead of an analog voltage. Module A has U011A. Which sensor counts as B depends on the maker, for instance the other bank or a probe further downstream behind an SCR catalyst. No manufacturer documents U016D publicly, and the NHTSA bulletin index has no entry for it. CARB 13 CCR 1968.2 obliges OBD to flag a lost digital link from such an input with its own code, and exhaust and NOx sensors are emission monitors in their own right, so the MIL is normally lit. Mixture correction, catalyst checks or urea dosing may fall back to defaults. U046E is invalid data from module B.
Possible causes
- Sensor module connector or harness damaged by exhaust heat or corrosion high
- Sensor module without power or ground (fuse, relay) medium
- Bus line to the module chafed under the vehicle medium
- Sensor module B or integrated probe electronics faulty medium
Symptoms
- Check engine light on
- Readiness monitors for catalyst or exhaust sensors not complete
- Diesel: SCR or emission warning, possibly reduced power
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for U016D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.