OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U016C

Lost Communication With Fuel Pump Control Module B

U016C concerns fuel pump control module B, the second pump driver in vehicles with two pumps or two tanks; module A has U0109. Ford's 2020-2023 gasoline OBD summary watches pump B through its duty-cycle feedback line: a signal stuck at 0 % or 100 % sets U016C within 2-5 s at 11-16 V. Roush CleanTech's propane-converted Ford trucks pass the state of the second fuel pump relay to the PCM through a smart relay module, so wiring, fuse or relay faults on that path trigger it too. Stellantis case S2108000100 (Ram 1500 2021) shows U0109 and U016C together with a check engine lamp and crank-no-start, cured by cleaning frame ground G803A. CARB requires lost digital links like this to be detected. Fuel supply is at risk; MIL expected.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number1 / 6C

Possible causes

  • Loose or corroded frame ground at the pump module (Ram G803A) high
  • Fuse or relay for pump B or its driver open medium
  • Feedback or bus wiring between pump driver B and PCM damaged medium
  • Fuel pump control module B faulty low

Symptoms

  • Check engine light on
  • Crank but no start, or stalling
  • Lack of power or rough running under load

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U016C

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication