OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U016B

Lost Communication With A/C Compressor Control Module

U016B appears when the control module of the electric A/C compressor, the inverter fed from the high-voltage battery in hybrids and EVs, stops talking to its partners. In GM's 2016 Volt table (16OBDG01) the engine controller watches frame $222 and fails after 10 s, Type B with MIL after two trips. GM bulletin 18-NA-096 (Volt and CT6 plug-in 2017-2018) explains a MIL with U016B after service: the compressor was unplugged while the bus was still awake, and a power-down followed by a battery disconnect clears it. PIC6609 (Blazer EV, Equinox EV, Optiq 2025) finds the compressor's low-voltage harness chafing against the right front driveshaft, with charging limited to 26 %. Saab lists the code as well. Cabin and battery cooling suffer.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number1 / 6B

Possible causes

  • Compressor unplugged while the bus was awake, stored code without real fault (GM 18-NA-096) high
  • Compressor low-voltage harness chafed on axle shaft or bracket (GM PIC6609) medium
  • Compressor control module without 12 V supply or ground medium
  • Electric compressor inverter faulty low

Symptoms

  • Air conditioning blows warm
  • Check engine or service high voltage message, charging possibly limited
  • Reduced battery cooling or charging power in heat

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U016B

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication