U0162
Lost Communication With Navigation Display Module
U0162 indicates that the navigation display, typically the screen unit of the head unit, no longer answers. Subaru documents it in two settings. TechTIPS 10/2015 describes a 2015 Legacy/Outback with Fujitsu Ten navigation that stored U0162 together with U0100, U0101 and U0122; the real cause was a wire not locked into the under-hood fuse box, which unseated the 30 A fuse feeding the IG2 relay. Bulletin 07-205-22 (2021 Crosstrek, 2020-22 Forester) has the rear vehicle detection module store U0162 and light the SRVD warning; new SRVD software improves CAN traffic with the head unit. U0163 is the navigation control unit, U0463 implausible display data. Map and screen may fail; no MIL.
Possible causes
- Supply interrupted, e.g. loose terminal at the fuse box (Subaru TechTIPS) high
- Software of the receiving module, e.g. rear radar control unit (Subaru 07-205-22) medium
- Connector behind the head unit loose after radio work medium
- Navigation display or head unit faulty low
Symptoms
- Navigation screen dark or not responding
- Rear vehicle detection warning lamp on (Subaru)
- Several communication codes stored at once
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for U0162
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.