OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U015D

Lost Communication With Automated Driving System Control Module B

U015D names automated driving system control module B. Where the driving assistance computer is split into two halves, each half and the navigation and motion module watch the other over Ethernet. Stellantis case S2508000095 for the 2026 Jeep Wagoneer lists U015D-00 in the CADM and in the GNMM, together with Ethernet link and time-sync faults. Replaced modules showed no defect; the cause was harness routing that pulled on the Ethernet plugs and loosened pins. The fix is to inspect and replace the harness, which must not be spliced, and to correct the position of clip C121. The driver sees blind-spot warnings, mirror lamps staying lit and disabled ADAS. U015C is module A, U045E implausible data from B.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number1 / 5D

Possible causes

  • Ethernet harness too taut, pins pushed out or fretted (Stellantis S2508000095) high
  • Harness clip in wrong position, connectors under strain medium
  • ADS control module B without power or ground low
  • ADS control module B internally faulty low

Symptoms

  • Blindspot Alert Unavailable message
  • Blind-spot lamps in the mirrors stay lit
  • Driver assistance features disabled intermittently

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U015D

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication