OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U015B

Lost Communication With Power Steering Control Module B

U015B is set when the second power steering controller, module B, stops sending. Redundant steering for automated driving splits the electronics into two paths so one can keep assisting if the other fails; Bosch describes such a fail-operational design with an electrical fallback giving roughly half the normal assist. A listener such as the primary steering unit or the driving automation computer logs U015B when B's messages are missing, following the pattern GM documents for its U0100-U02FF codes at 9-16 V. No manufacturer documents U015B publicly. Module A is U0131, implausible data from B is U045C. Normal steering usually continues on path A, but automated steering is blocked and a steering warning may appear.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number1 / 5B

Possible causes

  • Steering module B without power or ground (separate supply path) high
  • Connector at the steering rack or column wet, loose or corroded medium
  • Steering modules not matched after replacement or update low
  • Power steering control module B internally faulty low

Symptoms

  • Steering system warning in the cluster
  • Lane centring or automated steering unavailable
  • Steering assist possibly reduced

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U015B

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication