U015A
Lost Communication With Anti-Lock Brake System (ABS) Control Module B
U015A concerns a second anti-lock brake controller, module B. Vehicles prepared for automated driving need braking that still works after a single fault, so suppliers pair two independent units, for example Bosch's iBooster with the ESP control unit. If the partner that monitors module B, typically the primary brake controller or the driving automation computer, no longer receives its periodic messages, U015A is stored. No manufacturer documents this code publicly; the setting idea follows GM's generic rule for lost-communication codes (supervised message missing at 9-16 V). U0121 is ABS module A, U045B flags implausible data from B. Expect a brake or assistance warning and blocked automated functions.
Possible causes
- Brake module B without power or ground (own fuse in redundant layouts) high
- Bus line or connector to module B in the engine bay corroded or open medium
- Brake modules on incompatible software after repair low
- ABS control module B internally faulty low
Symptoms
- Brake system or driver assistance warning in the cluster
- Automated driving or adaptive cruise functions unavailable
- Code stored in the primary brake controller
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for U015A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.