OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0158

Lost Communication With Head Up Display

U0158 means the head-up display, which projects speed, navigation arrows or warnings into the windscreen, has stopped answering the module that supervises it, usually the instrument cluster. GM lists it in the Saab 9-5 (2011) U-code table and covers it in bulletin 22-NA-113: on 2020-2022 Cadillac CT4/CT5 with RPO UV6 the cluster stores U0158 when LIN messages arrive at an awkward moment while the HUD enters standby, leaving it blank until reset; the fix is a cluster reflash and pulling the HUD fuse. Stellantis notes for the 2021 Jeep Grand Cherokee WL and the 2024-25 Charger/Wagoneer S that the cluster may log it when leaving transport mode; clearing is enough there. U0459 covers implausible HUD data. No MIL.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number1 / 58

Possible causes

  • HUD stuck in standby due to message timing, cured by cluster software (GM CT4/CT5) high
  • Stored entry from transport/logistics mode on new vehicles (Stellantis) medium
  • HUD fuse, supply or ground interrupted medium
  • LIN/CAN line or connector under the dashboard faulty low
  • Head-up display unit internally faulty low

Symptoms

  • Head-up display blank or frozen
  • Brightness, height or page settings have no effect
  • Display returns after an ignition cycle

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U0158

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication